| Standard Accessories and Features
- Formed 3/16" Diamond plate bed with 1-1/2"
bottom flang.
- Formed 6" side rails.
- Formed 4" channel crossmembers.
- Required 3" to 5" Structural channel long sills.
- Full height headboards from 36" to 60" with
12" x 24" expanded metal window.
- Formed tailplate at 18" deep. Full width of bed.
- OMCS/ICC and California dock bumper.
- Rope hooks located at each crossmember.
- A. J Baer stake pockets.
- Seal-beam type clearance lights mounted in side rails,
and tailplate.
- OEM Tail lights mounted behind tailplate.
- Bodies fastened to frame on top of 1" hardwood,
and formed 10 guage cap.
- Ubolts at 5/8" with mylock nuts.
- All seams are caulked with 3M ultra pro seam sealer.
- Multiple coats of primer & urethane painting to maintain
durability.
- Wiring built as harnesses, and run thru loop clamps to
prevent chafing, and to secure mounting.
|
|
Material For Wood Construction
- Flatbed and frame.
- Flooring: 1-1/8" Hardwood flooring.
- Tailplate: 10 Gauge Smooth steel plate.
- Crossmembers: 10 Gauge mild steel.
- Long Sills: 3" to 5" Structural channel.
- Headboard: 2" x 2" sq tubing for 144"
and under with 10 Gauge overlay.
- Headboard: 3" structural channel for 156" and
over with 10 gauge overlay
|
|
